build free website
Mobirise

DriPHOS TLT

The surface treatment process uses thin layer technology to prepare surfaces for paint, powder coating or adhesive processes where adhesion is critical. This process is similar to the widely used vapour degreasing and cleaning process for removal of oil, grease and other surface contaminants. 

The DriPHOS Process

Click to Play the Video
Mobirise

DriPHOS TLT

Thin layer technology metal surface treatment process.

What is DriPHOS TLT?

The DriPHOS TLT surface treatment process uses thin layer technology to prepare surfaces for paint, powder coating or adhesive processes where adhesion is critical. This process is similar to the widely used vapour degreasing and cleaning process for removal of oil, grease and other
surface contaminants.

The DriPHOS TLT surface preparation process uses innovative chemistry with advanced equipment design to remove random oxide layers from metal surfaces replacing them with a consistent, structured, nano thick crystalline layer which increases surface area and gives
extended corrosion protection for storage of parts between production and finishing processes without rusting of mild steel and cast iron or oxidation on white metals.

Only two DriPHOS TLT liquids are used in the process

Process Description

The DriPHOS TLT process uses ONE TANK similar to the familiar vapour degreasing tanks.

These are built to order by our equipment partners. The vapour generator sump is deeper than the standard vapour degreasing tank to allow total immersion of metal parts, on jigs or in baskets. Tanks are designed to achieve the most economical usage of chemicals with the highest
standards of emission control into the workplace.

DriPHOS TLT process uses no water, is non- flammable and is very efficient, uses little energy, (operates a t 32EC) with fast cycle times typically 5 to 10 minutes. It is very economical and safe for operators and the environment. The process operates with the smallest footprint of any comparable surface treatment process.

DriPHOS TLT one tank process is simple to use and requires little operator intervention.

DriPHOS TLT PROCESSED METAL PARTS EMERGE FROM THE TANK :
- DRY
- WARM TO TOUCH
- AND CLEAN AND FREE OF OIL WITH A THIN RYSTALLINE LAYER COATING FOR MAXIMUM ADHESION WHICH PROTECTS THE SURFACE FROM RUSTING IN STORAGE.